Features Overview of Wireless Connection Ultrasonic Flaw Detector metal flaw detector
Description of Wireless Connection Ultrasonic Flaw Detector metal flaw detector
★ User friendly dialog interactive helps operations like Calibration, making curves, etc.
★ All tools you need: DAC, AVG, TCG,color Bscan, AWS, Spheroidization Rate, etc.
★ Pulse Repeatition Frequency: 20-3000Hz precise adjust, high speed scan, no miss out.
★ High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.
★ 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.
★ Can use probe frequency 30M perfectly .
★ High speed real-time flaw detection video recording. Unlimited USB data storage.
★ Blue tooth connection to mobile device to generate and print detection reports on-site.
★ IP65 standard. Alloy + Silica gel case, water and dust proof, solid and lasts forever. Damping support makes it stands in any angle.
★ Battery lasts 15 hours for one charge. Each battery has own charging control so with two batteries it can work around the clock.
★ 500 independence setup, any criterion can be input freely, we can work in the scene without test block
★ Big memory of 1000 A graph
★ Test Modes: Pulse echo, dual element and thru-transmission
★ Probe Types: Single Straight, Single Angle, Dual Straight, Dual Angle, Through, Creeping, Surface
★ Gate Monitors: Two independent gates controllable over entire sweep range
★ Internal rechargeable Li-ion battery pack rated 7.2V at 8000 mAh
★ 15 hours nominal operating time depending on display brightness
★ 4 hours typical recharge time
★ Pulse Energy: 70V,100V,200V, 300V, 400V, 500V selectable
★ Rectification: Positive half wave, negative half wave, full wave, RF System
★ Gate Monitors: Two independent gates controllable over entire sweep range
Specifications of Wireless Connection Ultrasonic Flaw Detector metal flaw detector
| Title | Parameter | Title | Parameter |
| Measuring Range(mm) | 0 ～ 15000 | Reject (suppression) | 0 to 80% full screen height |
| Material Velocity | 100～20000 m/s | Units | Inch or millimeter |
| Pulse Repetition Frequency | 20-3000Hz | Power Requirements | AC Mains 100-240 VAC, 50-60 Hz |
| Dynamic range | ≥38dB | Display Delay | -20 to 3400 µs |
| Linearity | Horizontal+/-0.2% | Probe Delay/Zero Offset | 0 to 99.99µs |
| Vertical | 2.5% | Operating Temperature | -10℃ to 50℃ |
| Bandwidth (amplifier bandpass ) | 0.2 to 35 MHz | Storage Temperature | -30℃ to 50℃ |
| Sensitivity | 120 dB max | Transducer Connections | BNC or LEMO |
| Amplifier Accuracy | +/-1 dB. | H×W×D(mm) | 260×175×60 (mm) |
| Resolving Power | >40dB (5P14) | Weight(kg) | 1.2kg |
| Sensitivity Leavings | >62dB | | |
Functions of Wireless Connection Ultrasonic Flaw Detector metal flaw detector
Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф).
Flaw sizing: Automatic flaw sizing using AVG or DAC/TCG, speeds reporting of defect acceptance or rejection.
Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity . ( V2 and two hole )
Convenient to make and use DAC/TCG and AVG to evaluate the echo, the curve can be modified and compensated.
Connectting U-Disk,the unit can get unlimited memory.
Automated make video of test process and play; use upan,the length of video is unlimited.
Color Bscan.
There are 17 standards of in the unit.
Blue tooth connection to mobile device to generate and print detection reports on-site. AWS D1.1.
Curved Surface Correction feature.
Crack Height Measure function.
Magnify gate:spreading of the gate range over the entire screen width.
Auto-gain function.
Envelope: Simultaneous display of live A-scan at 70 Hz update rate and envelope of A-scan
display.
Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
Scan Freeze:Display freeze holds waveform and sound path data.
Spheroidization Rate test.
Alarm:Beep and LED.
Real Time Clock.
Fill echo.
Capture mark.
Echo color within the Gate.
Standard Configuration of Wireless Connection Ultrasonic Flaw Detector metal flaw detector
|
| Name | QTY |
| 1 | Main unit | 1 |
| 2 | power adaptor | 1 |
| 3 | probe connecting cable | 2 |
| 4 | Instrument case | 1 |
| 5 | Instruction manual | 1 |
| 6 | Straight probe
20mm 2.5MHz | 1 |
| 7 | Angle probe 8x9 60°4MHz | 1 |
| 8 | Certificate of approval | 1 |
| 9 | Strap | 1 |
| 10 | App Software | 1 |
Feature picture of Wireless Connection Ultrasonic Flaw Detector metal flaw detector
TAG: Ultrasonic flaw detector Digital ultrasonic flaw detector Flaw Detector Ultrasonic
|
|
Wireless Connection Ultrasonic Flaw Detector metal flaw detector Images
|
